The G2 is the 2nd generation portable wireless microphone of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. Similar to the G1, this wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2). The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.
Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System
Different from G1, either the transmitter or the receiver of this new microphone wireless at 2.4G carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable.
Upgraded Algorithm for More Stable, Safe Transmission
The SyncoderTM Encrypted Transmission Algorithm 2.0 in this professional small wireless microphone enhances the signal stability within 492ft/150m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Integrated Signal Processing for Little Latency Sound Production
The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.
Quick Charge for Every Continued Filming
The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.
Small Features Packed For Each Optimization
A button is designed to mute this wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The low cut, gain control, and real-time monitoring function to give a wider range of adjustment, hence making sure that the system works under more conditions.
Pocket Size for Invisible but Audible Effect
Mobile content creators would like the mini wireless microphone G2. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, easy to be concealed and inconspicuous in most recording scenarios.
Specifications
Transmitter (TX)
- Wireless Transmission Digital 2.4GHz
- RF Frequency Band 2400-2483.5MHz
- Working Distance 492ft/150m (LOS area), 164ft/50m (NLOS area)
- Latency 12.5ms
- Mounting Pocket Clip
- Audio Input 1/8" / 3.5 mm TRS Mic Input
- Audio Input Level 1V (0dBV)
- RF Output Power ＜10mW
- Power Requirement 3.3V-4.7V
- Battery Type Built-in Lithium Battery
- Battery Charging Time 1.5h
- Battery Life 8h
- Display TFT Screen
- Dimensions 52X42X16mm
- Material Plastic
- Weight 39g
Receiver (RX)
- Wireless Transmission Digital 2.4GHz
- RF Frequency Band 2400-2483.5MHz
- Approximate RF Sensitivity -81dBm
- Working Distance 492ft/150m (LOS area), 164ft/50m (NLOS area)
- Mounting Pocket Clip
- Number of Audio Channels 1
- Audio Output 1/8” / 3.5 mm TRS Mic Output, 1/8“ / 3.5 mm TRS Headphone Output
- Gain 0-5 Level
- Audio Output Level Line Out: 1V; Monitoring: 25-30mW
- Power Requirement 3.3V-4.7V
- Battery Type 3.3VBuilt-in Lithium Battery, 400mAh
- Battery Charging Time 1.5h
- Battery Life 8h
- Display TFT Screen
- Dimensions 52X42X16mm
- Material Plastic
- Weight 35g
Microphone
- Form Factor Built-in/External Mic
- Sound Field Mono
- Polar Pattern Omnidirectional
- Frequency Range 50Hz-20KHz
- Sensitivity -40dB (±3 dB, re 1V/Pa at 1KHz)
- Max. SPL 135dB SPL (at 1KHz)
